Hemingray.info
 
CD 230
Hemingray D-512
Insulator Facts

Dimensions:3" H × 4" W
Primary Embossings:The Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
Years Produced: c.1930s-1940s
Style Identifiers:Hemingray often used style numbers, letters, words, or a combination to differentiate their insulator styles (such as: T.S., E2, № 1 Provo Type, Muncie Type, etc.) These are often, but not always, embossed on the insulator.
D-512, 512
Rarity Scale 0. No specimens known
1. Extremely Common (millions known)
2. Very Common
3. Common
4. Fairly Common
5. Uncommon
6. Very Uncommon
7. Rare (dozens known)
8. Very Rare (less than a dozen known)
9. Extremely Rare (2 or 3 known)
10. Unique (only one known)
Common (3/10)
Usage: Power (Primary Distribution)
Hobby Nickname: Frog Eyes
Series:510
Value Range: This is an estimated value range only, based on historical hobby collecting data. Insulator values vary widely depending on many factors, including embossing, color, condition, mold variations, manufacturing anomalies, and other attributes. Please visit the Hemingray Values page for more information.
$3-300
Insulator Overview

This style is nicknamed "frog eyes" by collectors and is the smallest in the D-500 series of insulators produced by Hemingray starting in the 1930s. These can be found embossed with both Hemingray and Lowex trademarks, and also come in a variety of amber colors and carnival glass, popular with collectors.
Known Embossings (16)
Primary EmbossingThe Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
EINThe Embossing Index Number (EIN) is a unique number assigned by the collecting hobby to each distinct embossing for an insulator design. It is normally shown in brackets, e.g. [050].
EmbossingMost common terms:
(F-Skirt): Front Skirt
(R-Skirt): Rear Skirt
/: New line of embossing
{}: Special note (not embossed on the insulator)
[#]: Represents a number

Other terms:
{MLOB}: Mold Line Over Base
(F-Crown): Front Crown
(R-Crown): Rear Crown
(F-Umbrella): Front Umbrella
(R-Umbrella): Rear Umbrella
BaseThe base is the bottom of the insulator. Hemingray made 4 different types of bases:

1. SDP: Sharp Drip Points
2. RDP: Round Drip Points
3. CB: Corrugated Base
4. SB: Smooth Base
Year AddedThis is the year that this embossing was officially recognized and added to the McDougald (1991-2008) or Briel (2011-2023) insulator price guides. It is not necessarily the year this embossing was discovered.
Photo
Status = In my collection

If the value in this column says WANTED, then that specific insulator is on my wanted list! If you have that insulator and would like to sell it, click on the WANTED link to submit photos and contact me.
HEMINGRAY [010] (F-Skirt) HEMINGRAY (R-Skirt) 512/[#]-MADE IN U.S.A.-[Number and dots] CB - Photo
HEMINGRAY [020] (F-Skirt) HEMINGRAY (R-Skirt) 512/[#]-MADE IN U.S.A.-[Number and dots] SB - No Photo-
HEMINGRAY [030] (F-Skirt) HEMINGRAY/MADE IN U.S.A. (R-Skirt) D-512 SB - No Photo-
HEMINGRAY [050] (F-Skirt) HEMINGRAY/MADE IN U.S.A. (R-Skirt) [#]/D-512 SB - No Photo-
HEMINGRAY [060] (F-Skirt) [# and dots]/HEMINGRAY/MADE IN U.S.A. (R-Skirt) D-512 SB - Photo
HEMINGRAY [062] (F-Skirt) [# and dots]/HEMINGRAY/MADE IN U.S.A. (R-Skirt) D-512 {A brass bushing molded into the pinhole with a square at the top} SB 2015 No Photo-
HEMINGRAY [070] (F-Skirt) [# and dots]/HEMINGRAY/MADE IN U.S.A. (R-Skirt) LOWEX/D-512 SB - No Photo-
HEMINGRAY [072] (F-Skirt) [# and dots]/HEMINGRAY/MADE IN U.S.A. (R-Skirt) LOWEX/D-512 {A brass bushing molded into the pinhole with a square at the top} SB 2015 No Photo-
NEW! HEMINGRAY [075] (F-Skirt) [# and dots] / HEMINGRAY / MADE IN U.S.A. (R-Skirt) LOWEX / [#] / D-512 SB 2023 No Photo
HEMINGRAY [080] (F-Skirt) [# and dots]/HEMINGRAY/MADE IN U.S.A. (R-Skirt) LOWEX/D-512/REG. U.S. PAT. OFF. SB - No Photo
HEMINGRAY [090] (F-Skirt) [# and dots]/HEMINGRAY/MADE IN U.S.A. (R-Skirt) [#]/D-512 SB - Photo
HEMINGRAY [100] (F-Skirt) [# and dots]/HEMINGRAY/MADE IN U.S.A. (R-Skirt) [#]/D-512 {A brass bushing molded into the pinhole with a square at the top} SB 2015 Photo
LOWEX [010] (F-Skirt) LOWEX/REG. U.S. PAT. OFF. (R-Skirt) 512/[#]-MADE IN U.S.A.-[#] SB - Photo
NEW! LOWEX [020] (F-Skirt) LOWEX/REG. U.S. PAT. OFF. (R-Skirt) 512/[#]-MADE IN U.S.A.-[#] {A brass bushing is molded into the pinhole}
Note: Unlike most Hemingray brass bushings, this bushing does not have a square in the top.
SB 2023 No Photo
NO NAME [010] (F-Skirt) 512/[#]-MADE IN U.S.A.-[# and dots] {Hemingray product} SB - Photo
NO NAME [020] (F-Skirt) [#]/512 (R-Skirt) MADE IN U.S.A. SB 2015 No PhotoWANTED
($100 Reward)
Removed Embossing

The following embossing(s) were removed from the price guide because they could not be verified to exist, were consolidated with other embossings, or were otherwise ambiguous/inaccurate. They are preserved here for historical purposes.

Primary EmbossingThe Primary Embossing is typically found on the front of the insulator and usually identifies either the manufacturer (such as "Hemingray") or the company that the insulator was made for (such as "AM.TEL.&TEL.CO.")

Insulators with No Name or No Embossing are denoted as such.
EINThe Embossing Index Number (EIN) is a unique number assigned by the collecting hobby to each distinct embossing for an insulator design. It is normally shown in brackets, e.g. [050].
EmbossingMost common terms:
(F-Skirt): Front Skirt
(R-Skirt): Rear Skirt
/: New line of embossing
{}: Special note (not embossed on the insulator)
[#]: Represents a number

Other terms:
{MLOB}: Mold Line Over Base
(F-Crown): Front Crown
(R-Crown): Rear Crown
(F-Umbrella): Front Umbrella
(R-Umbrella): Rear Umbrella
BaseThe base is the bottom of the insulator. Hemingray made 4 different types of bases:

1. SDP: Sharp Drip Points
2. RDP: Round Drip Points
3. CB: Corrugated Base
4. SB: Smooth Base
Year Removed
HEMINGRAY [040] (F-Skirt) HEMINGRAY / MADE IN U.S.A. (R-Skirt) LOWEX / D-512 SB 2003
Known Colors (30)
ColorThe color of the insulator.
Amber Blackglass
Blue Tint
Carnival
Citrine
Clear
Dark Carnival
Dark Honey Amber
Dark Olive Amber
Dark Orange Amber
Golden Amber
Green Tint
Honey Amber
Ice Blue
Ice Green
Lemon
Lemon Tint
Light Carnival
Light Citrine
Light Green
Light Lemon
Light Olive Amber
Light Straw
Off Clear
Olive Amber
Olive Amber Blackglass
Orange Amber
Red Amber
Whiskey Amber
Yellow
Yellow Amber